Mattresses - arjo Enterprise 9600X Notice D'utilisation

Mattresses

WARNING
Always use a mattress of the correct size and type. Incompatible
mattresses can create hazards.
Entrapment hazards may exist when using a very soft mattress, even
if it is the correct size.
The maximum recommended mattress thickness for use with split
side rails is 18cm.
Read the instructions for use supplied with the mattress.
Where the maximum patient weight specified for the mattress is
different to that specified for the bed, the lower value applies.
A label on the calf extension sheet indicates the correct
mattress size:
12.5 - 18cm
NOTE
The numbers 1, 2 and 3 on the label indicate different mattress platform lengths;
refer "Bed length adjustment" on page 27.
When choosing bed and mattress combinations, it is important
Mattresses and
split side rails
to consider the use of split side rails based on clinical
assessment of each individual patient and in line with local
policy.
When assessing the suitability of a mattress for use with split
side rails, the following factors should be considered:
Fig. 7 - Mattress size label
• The bed is designed to provide an acceptable split side
rail height when used with a foam mattress up to 18cm
(7 ins.) thick.
• Specialist powered air / foam replacement mattresses
will typically envelop the patient when loaded and can
generally be deeper than a foam mattress without
1 - 191cm
2 - 202cm
3 - 214cm
88cm
17