Weighing System - arjo Enterprise 9000X Notice D'utilisation

Weighing
Position the bed on a flat, level surface and apply the brakes (see page 16).
system
Remove the four transport locking bolts (
locking bolts at the head end of the bed and two at the foot end.
Retain the bolts and washers in case the bed needs to be transported at a
later date.
CAUTION
To prevent damage to the weighing mechanism, replace the transport locking bolts
and washers before transporting the bed. This is not necessary when moving the bed
short distances over smooth surfaces.
When replacing the transport locking bolts care must be take to avoid trapping or
damaging any cables.
2
1
Fig. 2 - Removing the transport bolts
1 2
) and washers ( ); there are two
2
1
13