Preventive Maintenance Schedule; Daily Cleaning; Inspection / System Check-Out - arjo AtmosAir Série Mode D'emploi

Laundering Detachable Top Cover
1. Unzip the top cover from the base for laundering.
Do not launder base as damage may occur.
2. Recommended wash temperature for top cover is 60° C (140° F) for 15 minutes.
3. Maximum wash temperature is 95° C (203° F) for 15 minutes.
4. Tumble dry at 60° C (140° F) or air dry.
5. Maximum drying temperature 80° C (176° F).

Preventive Maintenance Schedule

Preventive maintenance for the AtmosAir Fit MRS or AtmosAir Plus MRS consists
of regular cleaning (see Care and Cleaning) and an overall system check-out to be
performed at the intervals described below.
All components must be cleaned, disinfected and inspected after each patient's
use and before use by a new patient. Always use standard precautions, treating all
used equipment as contaminated. Institutions should follow local protocols for cleaning
and disinfection.

Daily Cleaning

The cover should be wiped daily with a mild soap and water solution. After wipe down,
dry surface with a towel.

Inspection / System Check-Out

Check each of the following before placing the mattress with a new patient:
1. Check mattress surface for tears or cracking; do not use if tears or cracks
are present.
2. Ensure mattress is free of stains and is not overly faded.
EN
9