Window Setup - Sony UP-50 Mode D'emploi

2
Select WINDOW by pressing the F or f button.
LAYOUT SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
MEMORY : FRAME / FIELD
MULTI PIX : 1 / 2 / 4 / 8 / 16
SEPARATE : OFF / ON
MIRROR : OFF / MIRROR
LAMINATION : GLOSSY
WINDOW : PRESS [ > ]
CAPTION : PRESS [ > ]
Q1 A 1
Position the cursor at WINDOW
by pressing the F or f button.
Note
If you go to the next step after you select WINDOW in step 2, the images
stored in the memory will be cleared.
3
Press the g button.
The WINDOW SETUP menu appears.

WINDOW SETUP

COLOR : 200
LAY SETUP : PRESS [ > ]
H START : 0 DOT (S)
V START : 0 DOT (S)
H WIDTH : 896 DOTS
V WIDTH : 464 DOTS
SAVE : PRESS [ EXEC ]
CANCEL : PRESS [ EXEC ]
Q1 A 1
4
Adjust the printer according to the printout obtained.
1 Select the item to be adjusted by pressing the F or f button.
2 Perform the adjustment by pressing the G or g button.
W I NDOW
/
Press the F or f button until
WINDOW appears.
S
I NDOW SE T UP
W
S
Continue to the next page c
:
L A Y PRE SS [ > ]
L A Y S E T UP [ > ]
Installation and Adjustment
95