Sony UP-50 Mode D'emploi page 60

Making Printouts With a Caption (Continued)
60
Operation
3 Press the EXEC button.
The character selected in 1 is deleted.
When the character to be deleted is placed among entered characters, the
characters after the deleted one shift back by one.
Note
After the EXEC button is pressed, the monitor screen may become dark for a
moment.
5
Repeat steps 2, 3 and 4 to enter the remaining characters of the caption.
To enter a space
1 Position the green cursor at the point where you want to enter a space.
2 Select SP by pressing the F, f, G or g button.
3 Press the EXEC button.
A single space is entered and the green cursor moves to the next position.
If there is a character at the position where the space is entered, that
character is deleted and a single space is left.
To replace a previously entered character without changing the
number of characters
You can replace a previously entered character with a new one.
1 Position the green cursor at the character to be replaced by performing the
operations explained in step 2.
2 Overwrite the invalid character with the correct character by performing the
operations explained in steps 3 and 4.
The previously entered character is replaced with the new one.
To add characters midway
1 Position the cursor at the position where a character is to be added by
performing the operations explained in step 2.
2 Select INS by pressing the F, f, G or g button. Then press the EXEC
button.
A single space is inserted between characters and the cursor is positioned at
the space.