Sony UP-50 Mode D'emploi page 51

1
Start the video source.
This operation is done using the controls of the video equipment acting as the
source.
Q1 A DUP 4
Indicates that the printer is set to the DUPLICATE
application mode where four identical reduced
images are printed on one sheet of paper.
2
Press the CAPTURE button at the instant the image you want to print appears
on the screen.
The image captured in the memory appears on the whole screen. (The image is
displayed in full size.)
To change the image in memory
1 Start the video source.
2 Press the CAPTURE button at the instant the image you want to print
appears.
The previously captured image is replaced with the newly captured image.
3
Press the PRINT button.
The identical reduced images are printed on one sheet of paper.
Q1 A
S
DUP 4 S
51
Operation