Sony UP-50 Mode D'emploi page 82

Setting Up the Printer (Continued)
82
Installation and Adjustment
3
Select IRE by pressing the F or f button.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
Position the cursor at IRE by
pressing the F or f button.
4
Select the desired IRE value by pressing the G or g button.
The selected IRE is displayed in three digits.
When
Resetting to the standard adjustment
The printout is a little whitish.
The printout is whitish.
The printout is very whitish.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
Switch the desired IRE value to green
by pressing the G or g button.
Note
Do not compensate for the input signal too much. Doing so results in the whole
of the printout becoming dark.
5
Press the MENU button.
The regular screen appears.
I RE
1 0 0 / 1 1 / 1 2 / 1 3
Press the F or f button until IRE appears.
S
IRE value
10 t 100
11 t 110
12 t 120
13 t 130
I RE
Display the desired IRE value
S by pressing the G or g button.
:
:
1 0 0 / 1 1 / 1 2 / 1 3