Registering A User Set - Sony UP-50 Mode D'emploi

Setting Up the Printer (Continued)

Registering a User Set

116
Installation and Adjustment
You can store up to three settings of all the printer specifications, set or adjusted by
using the buttons or with the menu, and store those settings as a user set. The
printer retains these setting - even if you turn off the power.
Thus, different operators can make printouts with different settings by recalling the
appropriate user set.
If the data of the recalled user set is modified, the printer operates according to the
modified data. In such a case, the modified data remains effective until another user
set is recalled with the LOAD USER button, even if you turn off the power.
After you finish all of required settings, proceed as follows to register them as a
user set.
LOAD USER button
1
Display the SYSTEM SETUP menu.
To display the SYSTEM SETUP menu, see steps 1 to 3 in "Adjusting the
Brightness of the Printer Window Display" on page 110.
If you want to name a user set, go to step 2.
If you do not want to name a user set, go to step 5.
2
Select USER NAME by pressing the F or f button.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
Position the cursor at USER NAME
by pressing the F or f button.
2,4,5
8
4,7
3
3,4,6
U S ER NA
Display USER NAME by
S
pressing the F or f button.
ME :
[ > ]
PRE S S