Adjusting The Tone Of The Printout - Sony UP-50 Mode D'emploi

Setting Up the Printer (Continued)

Adjusting the tone of the printout

92
Installation and Adjustment
You can adjust the tone so that the details in the white or black part are clearly
printed.
1
Press the MENU button, then select PRN by pressing the G or g button.
The PRINTER SETUP menu appears.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Switch PRN to green by pressing
the G or g button.
2
Select GAMMA by pressing the F or f button.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Position the cursor at GAMMA by
pressing the F or f button.
1,4
2
3
P R I NT ER S E T UP
/ c / l / PRN / i / o /
Display PRN in capital letters by
S
pressing the G or g button.
G AMMA
Display GAMMA by pressing the
S
F or f button.
:
s / NORMA L / h