Making Printouts With The Desired User Set Number - Sony UP-50 Mode D'emploi

Making Printouts with the Desired User Set Number

You can register all the printer settings as a user settings. The printer allows you to
register three sets of settings as User Set 1, 2 and 3. (See "Registering a User Set"
on page 116.) By selecting a desired user set number, the printer functions
according to the corresponding settings. You can change a part of the selected user
settings and make printouts.
Note
If you change the currently selected user set to another one, the image stored in
memory pages will be cleared.
1
POWER
1
2
3
6
7
CAPTURE PRINT
MEMORY SOURCE/
PAGE MEMORY
ALARM PRINT
Turn on the video monitor and printer.
Start the video source to display the source image on the video monitor.
This operation is done using the controls of the video equipment acting as the
source.
Press the LOAD USER button.
The currently selected user setting appears.
LOAD USER : 1 / 2 / 3 [ EXEC ]
The currently selected user set number
is lit in green.
3,4
5
L OAD US ER
1 / – / – [ EX EC ]
The currently selected user set
number is displayed.
Continue to the next page c
Operation
21