Sony UP-50 Mode D'emploi page 22

Making Full-Size Image Printouts (Continued)
22
Operation
4
Select the user set number.
Press the LOAD USER button repeatedly until the desired user set turns green
on the video monitor or until the desired user set is displayed on the printer
window display.
Each time you press the LOAD USER button, the user set number changes in
the order of 1 c 2 c 3 c 1....
The selected user set number will disappear within about three seconds.
LOAD USER : 1 / 2 / 3 [ EXEC ]
Switch the desired user set number
to green.
5
Press the EXEC button.
The user set selected in step 4 is executed.
While the selected user set is being executed, the following message appears.
When the user name is registered, the user name appears.
USER PRESET - 3 LOADING
USER 3
PLEASE WAIT
6
Press the CAPTURE button at the instant the image you want to print appears
on the screen.
The image is captured into memory.
7
Press the PRINT button.
The printer makes printouts according to the user set selected in step 4.
L OAD US ER :
– / – / 3 [ EX EC ]
Display the desired user set number.
P RE SE T - 3 L OAD I NG
USER 3