Sony UP-50 Mode D'emploi page 96

Setting Up the Printer (Continued)
96
Installation and Adjustment
When a black frame is printed or the image is partially cut
Adjust the printout size by using the H WIDTH and V WIDTH items from the
menu.
Menu adjustment
When you want to
item (defaults)
H-WIDTH
Change the screen
(NTSC: 896,
size horizontally
PAL: 896)
and adjust the
position
of the right edge.
The left edge
remains fixed.
V-WIDTH
Change the screen
(NTSC: 464,
size vertically and
PAL: 560)
adjust the position
of the bottom edge.
The top edge
remains fixed.
Adjusting the printout size horizontally.
WINDOW SETUP COLOR : 200
LAY SETUP : PRESS [ > ]
H START : 0 DOT (S)
V START : 0 DOT (S)
H WIDTH : 896 DOTS
V WIDTH : 464 DOTS
SAVE : PRESS [ EXEC ]
CANCEL : PRESS [ EXEC ]
Q1 A 1 S
Adjusting the printout size vertically.
When a black line appears on the printout
Adjust the printout area according to the position of the line on the printout, by
using the H START and V START items on the menu.
Menu adjustment
Position where the
item (defaults)
black line appears
H START
On the right
(NTSC/PAL: 0)
On the left
V START
At the top
(NTSC/PAL: 0)
At the bottom
Adjustment result
Button to be
used
Widened at the right edge
g button
(toward the right direction
of the screen).
Narrowed with the left
G button
edge remaining fixed.
Enlarged downwards.
g button
Vertical size reduced with
G button
the top edge remaining
fixed.
H W I D T H :
8 9 6 DOT S
V W I D T H :
4 6 4 DOT S
Adjustment result
Button to
be used
g button The image position shifts to the
right with the size remaining as is.
The image position shifts to the
G button
left with the size remaining as is.
g button The image position shifts up with
the size remaining as is.
The image position shifts down
G button
with the size remaining as is.