Sony UP-50 Mode D'emploi page 30

Making Variations of Printouts (Continued)
30
Operation
3
Select PRN SPEED by pressing the F or f button.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Position the cursor at PRN SPEED
by pressing the F or f button.
When you use the UPC-540 Self Laminating Printing Pack, you can select the
finish of the printouts. (See "Selecting the Lamination Pattern" on page 114.)
4
Select the desired PRN SPEED by pressing the G or g button.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Switch the desired PRN SPEED to green by
pressing the G or g button.
When you want to
Make a printout at normal speed.
Make a printout at high speed.
5
Select SYSTEM by pressing the F or f button.
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY. : 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
PRN SPEED : / HIGH
MOTION CHK : OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM : PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1
Position the cursor at SYSTEM by pressing
the F or f button.
PRN S P E ED
Press the F or f button until
S
PRN SPEED appears.
PRN S P E ED
Display the desired PRN SPEED by
S
pressing the G or g button.
PRN SPEED
NORMAL
HIGH
Y S T EM
S
Press the F or f button until
S
SYSTEM appears.
:
/ H I GH
:
/ H I GH
:
PRE SS [ > ]