Adjusting The Brightness Of The Printer Window Display; Selecting Whether The Operation And Error Tones Sound; Setting The Baud Rate; Displaying The Remaining Amount Of The Ink Ribbon - Sony UP-55MD Mode D'emploi

Adjusting the Brightness of the
Printer Window Display
When it is hard to read the contents of the printer
window display, adjust the brightness using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the LCD-CNTR. item, then adjust the
brightness of the printer window display.
Adjust the brightness by pressing
G
the
Selecting Whether the Operation
and Error Tones Sound
Whenever you press a button on the front door, the
operation tone sounds (one time). When an error occurs,
the alarm tone sounds (three times). You can turn these
tones on and off using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the BEEP item, then select whether or not the
operation and error tones sound by pressing the G
or g button.
When you want to
Sound the tones.
Disable the tones.

Setting the Baud Rate

When controlling the printer with a computer connected
to the printer's RS-232C connector, select the
appropriate baud rate. For details, contact your nearest
Sony dealer.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
62
Making Various Settings
g
or button.
Selection
ON
OFF
2
Select the BAUDRATE item, then select the desired
baud rate by pressing the G or g button.
Baud rate (bps) Baud rate displayed on the
menu. (The display changes
from first two digit indication to
four digit indication.)
1200 12 t 1200
2400 24 t 2400
4800 48 t 4800
9600 96 t 9600
Displaying the Remaining Amount
of the Ink Ribbon
You can always display the remaining amount on the
video monitor.
Note
Use the ribbon remaining display as a criterion.
1
Display the OUTPUT SETUP menu.
2
Select the RBN REMAIN item, then select whether
or not the type of ink ribbon and the remaining
amount are to be displayed on the monitor.
When you want to
Display the remaining amount.
Erase the information about the
remaining amount of the ink ribbon.
Ink ribbon information
Icon of ink ribbon
When the ink ribbon runs out
or is not loaded, the message
"SET RIBBON" appears.

Registering a User Set

You can store up to three settings of all the printer
specifications set or adjusted by using the buttons or the
Setting
ON
OFF
Number of printouts
that can be made
with the ribbon