Mode - Setting Of Setpoint Mode - Burkert 8624-2 Standard Instructions De Service

6.6.4 MODE - setting the setpoint mode
Fig.: Setting the setpoint mode
Setting the setpoint: internal setpoint
With internal setpoint setting, the setpoint value for the controlled variable is
entered in the previously set unit and stored. The device controls to this value.
Settings are possible within the values of the sensor scaling(see 6.6.3)
(factory setting: 00.00).
The unit corresponds to the value set in the menu item UNIT .
Fig.: Setting the setpoint: internal setpoint
Select here whether the device shall work with internal or
external setpoint. The choice External Setpoint is shown by
the number "1" in the lower display line.
(factory setting: external setpoint
internal
setpoint
1
external
setpoint
increase digit
next digit
8624-2 Standard - 25