I - Initial Checks; Unpacking The Clock - Bodet Style 5S Manuel D'installation Et De Mise En Service

I - Initial checks

Thank you for choosing a BODET clock.
This product has been carefully designed for your satisfaction, using ISO 9001 quality processes.
We recommend that you read this manual carefully before handling the clock.
Retain this manual for reference throughout the operating life of your clock.
Using the clock in a manner not according to these instructions may cause irreversible
damage to the clock and invalidate the product guarantee.
These instructions relate to "NTP" models. For other models please see the corresponding
instructions.

1.1 Unpacking the clock

Carefully unpack the clock and check the contents of the package. This should include:
– the Style clock and this manual,
– an antistatic cleaning kit,
– a pack of screws and rawlplugs.
- IMPORTANT: product label marking.
A product label affixed to the back of the clock is visible when the support is removed. This gives
the clock model (Style 5, Style 7, etc.), the operating voltage, a type of clock and various other
information such as colour.
Check that the Style clock delivered is correct for your intended usage.
1.2 Cleaning
Use an antistatic product identical to that supplied. Never use alcohol, acetone or other solvents
which may damage your clock's casing or glass.
1.3 Pre-requisit
For the commisioning of the clocks you must install «BODET Detect». This software is available
on BODET web site www.bodet-time.com as a free download.
Note: the Ethernet network connection to which the Bodet clock is connected must be PoE, the
power being supplied by a PoE switch or a PoE injector.
Bodet recommends the following devices:
■ PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus,
Globtek.
■ PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong.
15