Network Configuration Page - Bodet Profil 930 Manuel D'installation Et De Mise En Service

4.3 Network configuration page

This page is used to configure the clock on the network. The warning indicates that the clock might
lose network connectivity if the settings are incorrect.
The following information is displayed:
• MAC Address: this is the clock's MAC address. This address is unique to each device.
This number is indicated on a label on the back of the Bodet clock.
• Name: the user-defined clock name.
• Enable DHCP tick box: used to automatically set the product's IP settings on the network.
If this box is unchecked, the following settings may be accessed:
• IP Address: lets you set the device's IP address manually (required).
• Subnet Mask: the subnet mask associates a clock with the local network
(required).
• Gateway: the gateway can be used to connect the clock to two data networks.
• DNS Address: this can be used to associate a domain name with an IP address.
This avoids having to enter an IP address in the browser as a user-defined name can be used
instead.
For example, www.bodet.com is easier to remember than 172.17.10.88.
The "Save and Reboot" button is used to save your settings and reboot the clock.
EN
17