Publicité
GB
IE
IT
CH
BOILING UNIT OR STEAM COOKER
The function is available in the AUTOMATIC PASTA COOKER(7-CPA)
WATER COOKER:
This is the default function, "boiling unit" icon, and alternative to steam (RELAY 3), which sets the water level on the
upper electrode and represents the operating state when the water level is reached to boil the product in water.
When the water falls below the upper electrode, the controller starts the solenoid valve (SV1), which is connected in
parallel to a relay connected to INPUT 2, and when the latter closes, the "boiling unit" icon is replaced by "boiling unit
animation":
sequence of 4 icons within 1 second; the 1-second animation continues and starts over until INPUT 2 opens again
(boiling unit animation 1 / 2 / 3 / 4)
STEAM COOKER:
"Steam cooker" icon: alternative function to the boiling unit (RELAY 3), which sets the water level on the lower electrode
and represents the operating state when the water level is reached to steam the product.
When the water falls below the lower electrode, the control unit activates the fast charging solenoid valve (SV1), which
is connected in parallel with a relay connected to INPUT 2; when the latter closes, the "steam cooker" icon is replaced by
the "steam cooker animation" icon:
sequence of 4 icons within 1 second; the 1-second animation continues and starts over until INPUT 2 opens again.
(steam cooker animation 1 / steam cooker animation 2 / steam cooker animation 3 / steam cooker animation 4)
ACTIONS: it is possible to switch between the 2 functions by pressing for 0.1 second at any time together; a single beep
will sound.
SLOW WATER LOADING
The function is available in the AUTOMATIC PASTA COOKER(7-CPA)
When accessing the menu, the lower icon (the one being pressed) flashes on/off (2 on and 2 off in 1 second). It is
POSSIBLE to click on the flashing icon for 0.1 second to exit the menu; this action will be confirmed by a single beep.
The icon via which you accessed the menu will remain visible.
When the menu is accessed, all other menu icons become blurred (there are no blurred animations, the reference icon is
displayed).
In any case, if no key is pressed for 30 seconds, the controller automatically exits the menu and sets the values present at
that time
69
Publicité
