Publicité
CLEANING, MAINTENANCE, STORGE, DISPOSAL
17.1 Cleaning
Wrong cleaning agents can attack the varnish of the machine. Do not use solvents,
nitro thinners, or other cleaning agents that could damage the machine's paint.
Observe the information and instructions of the cleaning agent manufacturer!
Regular cleaning is a prerequisite for the safe operation of the machine and its long service life.
Therefore, clean the machine after each use and remove any sawdust with a brush, broom
•
or vacuum cleaner.
17.2 Maintenance
Handling the machine with the power supply up can lead to serious injuries or even
death. Always disconnect the machine from the power supply before servicing or
maintenance work and secure it against unintentional or unauthorised reconnection!
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
Before each operation, check that the safety devices are in perfect condition.
•
•
Check the connections for tightness at least once a week.
Regularly check that the warning and safety labels on the machine are in perfect and
•
legible condition.
17.2.1 Maintenance schedule
The type and degree of machine wear depend on the operating conditions. The following intervals
apply when the machine is used within the specified limits:
interval
Before usage
machine
Before usage
machine
1 x week
V-Belt tension
1 x month
Moving parts
1x month
break
Interlocked movable
1x month
guards
HOLZMANN MASCHINEN GmbH
N O T E
W A R N I N G
components
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORGE, DISPOSAL
activity
Cleaning the machine
Removal of all loose parts / tools
Check and readjust belt tension if necessary.
Greasing / lubrication of guides / gear racks /
wheels
Function test to determine that the spindles have
come to a standstill within the specified time (8-
10seconds).
interlocked movable guards - by means of a
sequential opening of each guard to stop the
machinery and checking that it is not possible to
start the machinery with each guard open
36
FS160SOLID
Publicité
