Publicité
the machine. The machine must be levelled simultaneously at all support points. It is also
necessary to guarantee a distance of at least 0.8 m around the machine. In front of and behind
the machine, the necessary distance must be provided for the feeding of long workpieces.
Always work in front of the machine from right to left.
14.3 Assembling the machine
The machine is pre-assembled, the parts removed for transport must be assembled according to
the following instructions and the connection to mains have to be made.
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
1. Assembly Cover
There are four screws (3) on the
top of the protective hood (2).
Remove the screws (3) and attach
the hinged top cover (1) as
shown.
2. Assembly Protective hood
Assemble the protective hood (2)
to the machine table using the
two screws (1). The protective
hood (2) can be fixed here at
different positions adapted to the
workpiece to be machined.
3. Locking the cover
To lock the cover, release the lock
button (1), slide the clamp away
from the center of the hood so
that the tongue is under the hood,
and retighten the lock button (1).
Repeat the same procedure on the
other side.
This cover MUST be closed and locked
when the machine is in operation.
ASSEMBLY
30
FS160SOLID
Publicité
