Publicité
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
TRANSPORT
Damaged or insufficiently strong hoists and load lifting equipment may result in
serious injury or even death. Always check hoists and load lifting equipment for
adequate load-bearing capacity and perfect condition, secure the loads carefully and
never stand under lifting loads.
To ensure proper transport, also observe the instructions and information on the
transport packaging regarding centre of gravity, attachment points, weight, means of
transport to be used and the prescribed transport position, etc..
NOTICE:
appropriate load capacity and a fork of at least 1200 mm length or a crane.
The fork (G) of the truck should be positioned under the machine as shown in the
illustration on the left.
If you are using a crane (E), proceed as follows:
•
Prepare two pieces of ropes or belts (H) with appropriate load-bearing capacity and
length;
Hook the ropes to the crane hook;
•
Attach the ropes as shown on the picture above.
•
Position the crane so that the machine can be lifted without tipping.
•
•
Gently lift the machine to avoid shocks and load fluctuations and carefully transport it to
the installation site.
ASSEMBLY
14.1 Checking Scope of Supply
Check the machine immediately after delivery for transport damage and missing parts.
14.2 The workplace
Choose a suitable place for the machine.
Pay attention to the safety requirements and the dimensions of the machine.
The selected location must ensure a suitable connection to the electrical supply as well as the
possibility of connection to an extraction system. Make sure that the floor can support the load of
HOLZMANN MASCHINEN GmbH
N O T I C E
W A R N I N G
To lift the machine, you need a forklift truck (D), pallet truck (F) with the
www.holzmann-maschinen.at
TRANSPORT
29
FS160SOLID
Publicité
