Publicité
Connect consumer:
• Connect the electrical loads after the device has warmed up for about five minutes.
Loading the device
• If the 230V 1~ socket is active, the socket can be operated with a power of 4500W.
• If the 230V 1~ socket is active, the socket can be operated briefly (5 min.) with a
max. power of 5000W.
• The generator can additionally be permanently loaded with 12V DC, 100W
Device damage threatens! The 400V socket may be permanently (S1) loaded
with 4500W and briefly (S2) loaded with 5000W for max. 5 min. Always con-
nect consumers gradually!
During operation, individual parts become very hot, especially on the exhaust
system. Keep limbs away! Wear protective gloves!
Toxic exhaust gases are produced during operation. Never operate the device
indoors! Ensure sufficient ventilation!
Stop engine:
• Let the device run briefly without any load before switching off.
• The device continues to cool down.
• Turn the on/off switch (7), page 13 to the "OFF" position with the key.
• Close the fuel valve. See fig.18, Page 23.
24
V. 1.0
EN
Publicité
