Publicité
Examples of Consumers with high starting current are:
• Devices with electric motors (water pumps, circular saws, planing bench etc.)
• Devices with large gear ratios (e.g. planing bench)
• Devices with compressors (freezers, refrigerators, air conditioners, etc.)
• Welding equipment (high current during ignition process)
Before starting the engine
Do not overload the device. The load must be kept within the values indicated
on the device's rating plate. Note that most electrical appliances require more
wattage to start than indicated on the rating plate. Never change the engine
speed of the device.
Do not connect any electrical devices to the device until the device is started.
Only connect electrical equipment that is in good condition.
22
Operation
Mechanical
switch
fuel filter
fig.17
V. 1.0
EN
Publicité
