Fill/tank diesel
• Fill with diesel fuel before initial start-up and before each use.
Risk of damage to equipment and environment! Never fill with too much fuel
Fill up fuel, up to the neck of the tank only. If fuel leaks, wait until it evaporates
and then start the device
Always switch the device to OFF before fuelling.
Keep at least 3m distance from the work area when refuelling.
• Refuel only in well ventilated places.
• Place the device on a level surface.
• Slowly open the fuel tank by turning the Tank cap (3), p.13 counterclockwise and
removing it.
• If fuel overflows, wipe the fuel carefully.
Never open the fuel tank quickly. Fuel may splash out due to overpressure!
Open the tank slowly.
• Fill the fuel slowly through a funnel.
• Close the fuel tank by putting on the cover and turning it clockwise.
Fuels may contain dissolvent-like substances.
Avoid skin and eye contact with the fuels.
16
V. 1.0
EN