Télécharger Imprimer la page

Elica NT SWITCH GLOW BL/A Prescriptions De Montage Et Mode D'emploi page 17

Publicité

9+10 Child Lock
10
Pause / Recall
LED
Function
11
View Power Level
12
View extraction speed (power)
13
Cooking zone display
14
Extractor fan display
15
Timer display
16
Temperature Manager display
17
Filter assistance indicator
18
Automatic extraction function indicator
19
Timer indicator active
20
Egg Timer Indicator active
21
Bridge indicator active
22
FLAP indicator
THINGS TO KNOW BEFORE STARTING
This manual describes the main functions. Use the QR
code at the start of the manual to access the full
instructions online. All functions of this hob comply with the
most stringent safety regulations. For this reason:
• Some functions will not be activated, or will be
automatically deactivated, in the absence of pots on
the burners or when they are poorly positioned.
• In other cases the activated functions will be automatically
deactivated after a few seconds, if the specific function
requires a further setting that has not been selected (e.g.:
"Turning the hob on" without "Selecting the cooking zone"
and the "Operating temperature", or the "Lock Function" or
the "Timer" function).
Wait for the display to turn off before approaching the
cooking zone.
COOKING ZONE DISPLAY
The following is shown on the cooking zone displays:
Function
Cooking zone on
Power Level
Residual Heat Indicator
Pot Detector
Bridge Zone Function active
Temperature Manager Function active
Child Lock Function active
Pause function
Automatic Heat UP function
CHARACTERISTICS OF THE HOB
● Safe Activation
The product is activated only in the presence of pots on the
cooking zone: the heating process does not start or is
interrupted if there are no pots, or if these are removed.
● Pot Detector
The product automatically detects the presence of pots on
the cooking zones.
● Safety Shut Down
For safety reasons, each cooking zone has a maximum
operating time, which depends on the power level set.
● Residual Heat Indicator
When switching off one or more cooking zones, the
residual heat is indicated with a specific visual signal on the
display of the corresponding zone by the symbol
HOB OPERATION
Note: Before activating any functions, the desired zone
must be enabled
● Power-on
Press (touch)
light will turn on to indicate that the hob/extractor fan is
ready for use.
Press again to turn off
Note: This function has priority over the others.
● Selecting the cooking zones
Touch (press) the Selection bar (3) corresponding to the
desired cooking zone.
● 9 Power Levels
The hob features 9 power levels. Slide your fingers along
the Selection bar (3):
to the right to increase the power level;
to the left to decrease the power level.
Value
● Power Booster
The product features a supplementary power level (after
level
), which remains active for 5 minutes, after which
the temperature returns to the previously set value.
Touch and slide your fingers along the Selection bar (3)
(beyond level
The Power Booster level is shown on the display of the
selected zone with the symbol
● Bridge Zones
Thanks to the Bridge function, the cooking zones can
operate in a combined way, creating a single zone with the
same power level. This function allows evenly distributed
16
ON/OFF(1) hob/extractor; the indicator
) and activate the Power Booster
.
.

Publicité

loading