Publicité
USING THE EXTRACTOR FAN
The extraction system can be used in the duct-out version
with external evacuation, or in the recirculating version with
filtering and internal recirculation.
Consult
the
website
www.shop.elica.com to view the full range of available
kits for the various installations in both the recirculating and
duct-out version.
●
Duct-Out Version:
Vapours are exhausted outside via a series of pipes (to be
purchased separately). Connect the product to wall-
mounted exhaust pipes and holes with a diameter
equivalent to the air outlet (connecting flange). For more
information on the pipes and their dimensions see the page
relating to accessories in the installation manual - Duct-Out
version. The use of pipes and outlet holes in the wall with a
smaller diameter will reduce the extraction performance
and drastically increase the noise level. All responsibility in
this regard is therefore denied.
For maximum extraction efficiency: • We recommend a
maximum pipe route length of 7 linear metres. • We
recommend using no more than two 90° bends along the
entire 7 linear metres • Avoid drastic changes in the ducting
diameter, seeking to maintain a diameter of Ø 150 mm (or
a rectangular section of 222 x 89 mm).
●
Recirculating Version:
The extracted air will be filtered in special grease filters and
odour filters before being sent back into the room. This
product includes filters and piping for an installation that
allows air to escape from the cabinet. For further
information on the accessories supplied, see the illustrated
part of this manual.
Important
It is possible to buy an extraction operation Kit. In this case
the charcoal filter must not be installed. Furthermore, the
use of the extraction kit may require a different installation
of the hood from what shown in this manual; therefore,
before starting the installation of the hood, buy the
extraction kit and consult the instructions enclosed with the
kit.
www.elica.com
and
3. OPERATION
CONTROL PANEL
K.
Function
1
ON/OFF of the hob / hob extractor fan
2
Cooking zone position indicator
3
Cooking zone selection
Increase/Decrease Power Level
4
Temperature Manager activation
5
Extractor fan buttons
6
Extractor fan selection
Increase/Decrease extraction speed (power)
7
Activate automatic functions
Reset filter saturation
8
Activate Timer
Increase/Decrease Timer value
9
Key Lock
15
Publicité
