Publicité
Controls
Setting the temperature in the fridge section
Fig. 10 Example illustration
u Carry out action steps according to the illustration.
w Temperature is set.
Setting the temperature in ColdFresh
Set the temperature using the ColdFresh-Value. (see Cold‐
Fresh-Value )
Temperature unit
Use this function to set the temperature unit. You can set
degrees Celsius or degrees Fahrenheit as the temperature
unit.
Setting the temperature unit
Fig. 11
Fig. 12 Example illustration: Switch from degrees Celsius to
degrees Fahrenheit.
u Carry out action steps according to the illustration.
w The temperature unit is set.
ColdFresh-Value
Use this function to set the ColdFresh-Value. With the Cold‐
Fresh-Value, you can set ColdFresh slightly warmer or colder
if necessary due to higher or lower ambient temperatures.
The ColdFresh-Value is pre-set to value 5 as delivered. If you
change the ColdFresh-Value, refer to the following table:
Value Description
1
Lowest temperature
82
Value Description
1-4
The temperature can drop below 0 °C which means
foods can easily freeze.
5
Pre-set temperature
9
Highest temperature
Setting the ColdFresh-Value
Fig. 13
Fig. 14 Example illustration: Switch from value 5 to value 6.
u Carry out action steps according to the illustration.
w The ColdFresh-Value is set.
FreezerLevel
Use this function to set the FreezerLevel. You can use the
FreezerLevel to make the **** freezer compartment slightly
warmer or colder. The FreezerLevel is pre-set to value 5 as
delivered.
Value Description
1 to 4 **** freezer compartment gets colder.
5
Pre-set value
6 to 9 **** freezer compartment gets warmer.
Setting the FreezerLevel
Fig. 15
Fig. 16 Example illustration: Switch from value 5 to value 6.
u Carry out action steps according to the illustration.
w The FreezerLevel is set.
* Depending on model and options
Publicité
