Publicité
7 Controls
7.1 Control and display elements
7.1.1 Status display
Fig. 6
(1) Fridge compartment
temperature display
The Status displays the set temperature. From there, you
can navigate to the functions and settings.
7.1.2 Display symbols
Display symbols provide information about the status of the
appliance.
Symbol
Appliance status
Standby
The appliance or temperature zone
is switched off.
Flashing number
Appliance is working. Temperature
flashes until the set value is
reached.
Flashing symbol
Appliance is working. Setting has
been made.
White bar in the upper area builds
up when a function is activated.
The bar disappears when the func‐
tion is active.
White bar in the lower area
Function is activated.
Back
confirmed, the menu jumps to the
next higher level.
7.2 Appliance functions
7.2.1 Notes on the appliance functions
The appliance functions are set at the factory so that your
appliance is fully functional.
Before you alter, activate or deactivate the device functions,
make sure that the following requirements are met:
You have read and understood the descriptions of how
q
the display works. (see 3 Functionality of the Touch
display)
You have familiarised yourself with the operating and
q
display elements of your appliance.
Switching the appliance off and on
Use this function to switch the entire appliance off and on.
Switching off the appliance
When you switch the appliance off, then the previously
saved settings are saved.
* Depending on model and options
When
the
display
is
Make sure that the following requirements are fulfilled:
Handling instructions (see 11 Shutting down) are carried
q
out.
Fig. 7
Fig. 8
u Carry out action steps according to the illustration.
w Appliance is switched off.
w The standby symbol appears in the display.
w Display turns black.
Switching on the appliance
If the display is in sleep mode:
u Press any navigation key.
Fig. 9 Example illustration
u Carry out action steps according to the illustration.
When the appliance starts in demo mode:
u Deactivating demo mode. (see Deactivating demo mode)
w The appliance is switched on.
w Previous settings are restored.
w The appliance cools to the target temperature set.
Temperature
Use this function to set the temperature.
The temperature depends on the following factors:
Frequency of door opening
-
Duration of door opening
-
-
Room temperature of the installation site
Type, temperature and quantity of food
-
Temperature zone
Factory-set
temperature
5 °C
Fridge section
0 °C
ColdFresh
Controls
Recommended
setting
4 °C
B-Value (see
Cold‐
Fresh-Value )
81
Publicité
