Publicité
Putting into operation
Menu
Description
Main menu
When you switch the appliance on, you are
automatically in the main menu.
From here you can navigate to the most
important
Settings menu and to the Advanced menu.
The Settings menu contains additional
appliance functions for setting up your
appliance.
(see 3.2.1 Opening the Settings menu)
Settings
menu
Advanced
The advanced menu contains special appli‐
menu
ance functions for setting up your appli‐
ance. Access to the Advanced menu is
protected by the numerical code 1 5 1.
(see 3.2.2 Opening the Advanced menu)
3.2.1 Opening the Settings menu
Fig. 2 Example illustration
u Carry out action steps according to the illustration.
w Settings menu is open.
u If necessary: Navigate to the desired function.
3.2.2 Opening the Advanced menu
Fig. 3
Fig. 4 Example illustration, access with numerical code 151
u Carry out action steps according to the illustration.
w The expanded menu is open.
u If necessary: Navigate to the desired function.
3.3 Sleep mode
If you do not touch the display for 1 minute, the display
switches to sleep mode. In sleep mode, the display bright‐
ness is dimmed.
78
appliance
functions,
to
3.3.1 Ending sleep mode
u Press any navigation key.
w Sleep mode is ended.
4 Putting into operation
the
4.1 Switching on appliance (first use)
Make sure that the following requirements are fulfilled:
The appliance is properly installed and connected
q
according to the installation instructions.
All adhesive strips, adhesive and protective films and
q
transport locks are removed from inside and on the appli‐
ance.
All marketing leaflets are removed from the drawers.
q
You are familiar with the functionality of the Touch
q
display. (see 3 Functionality of the Touch display)
Switch on the appliance using the Touch display:
u If the display is in sleep mode: Briefly touch the display.
u Carry out action steps according to the illustration.
Fig. 5 Example illustration
w The status display appears.
w The appliance cools to the temperature set at the factory.
w The appliance starts in demo mode (status display with
DEMO appears): If the appliance starts in demo mode,
you can deactivate demo mode within the next 5 minutes.
(see Demo mode)
Note
The manufacturer recommends:
u Stock with food: Wait for around 6 hours until the set
temperature is reached.
u Store frozen foods at -18 °C or colder.
u Observe the notes on storing food. (see 5.1 Information
regarding storage)
4.2 Inserting the components
u Insert the supplied components to make the most of your
appliance.
5 Storage
5.1 Information regarding storage
WARNING
Risk of fire
u Do not use any electrical appliances in the food area of
the appliance unless recommended by the manufacturer.
Note
The energy consumption increases and the cooling power
goes down if ventilation is not sufficient.
u Always keep air slots clear.
* Depending on model and options
Publicité
