Publicité
xFUME™ ADVANCED 115V – CSA
2.4.2
Safety instructions for use of electrical devices
► Please read all the instructions before using this device.
► Keep hair, loose clothing, fingers and all body parts away from the openings and movable
parts.
Improper use or connection can result in life-threating electric shock or fire. This may result in
serious injuries.
► Use the device according to its designated use only.
► Only use manufacturer-approved component parts.
► Check all live cables and connections for proper installation and damage.
► If the device does not function correctly, was dropped or damaged, is left outdoors or fell into
water, have it checked by an authorized specialist store.
► Do not touch the device with wet hands.
► Do not insert any objects into the device's openings.
► Do not use the device if an opening is blocked.
► Keep the device free of dust, fluff, hair and anything that could impair the flow of air.
2.4.3
Safety instructions for electrical components
► Check electric tools for damage and ensure that they function properly and in accordance with
their designated use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
2.4.4
Safety instructions for welding
► Arc welding can damage eyes, skin and hearing. Note that further hazards can occur in
connection with other welding components. For this reason, always wear the mandatory
protective clothing in accordance with local laws and directives.
► All metal vapors, especially lead, cadmium, copper and beryllium, are harmful. Ensure sufficient
ventilation or extraction. Do not exceed the established occupational exposure limit (OEL).
► To prevent phosgene gas from forming, always use clear water to rinse workpieces that have
been degreased using chlorinated solvents. Do not set up degreasing baths containing chlorine
near the welding station.
► Adhere to the general fire protection regulations and remove flammable materials from the
vicinity of the welding work area prior to starting work. Provide suitable fire extinguishing
equipment in the work area.
2.4.5
Safety instructions for personal protective equipment
► Do not wear any loose clothing or jewelry.
► Wear a hairnet over long hair.
► Note local laws and directives concerning protective equipment.
► Make sure that any third parties in the direct vicinity are wearing personal protective
equipment.
► Wear your personal protective equipment according to the hazard.
BAL.0882.0 • V01
2 Safety
EN - 9
Publicité
