Publicité
10 Maintenance and cleaning
Unscrew the filter cartridges (2x) and pull
5.
out concentric between the rotary nozzles.
Mind not to damage the dust collecting
bags and not to wedge the filter cartridges.
Dust-proof the dust collecting bags (2x)
6.
(cable/cable tie) with the filter cartridges
(2x) in them.
Dispose of the dust collecting bags (2x) and
7.
the filter cartridges in accordance with local
laws and directives. ð 13.2 Disposal of
welding dust (Page 34)
Insert new filter cartridges (2x) concentric
8.
between the rotary nozzles.
Tighten the filter cartridges (2x). Ensure that
9.
the filter cartridges do not tilt.
To ensure that they are tight, use a suitable
10.
tool to torque the filter cartridges (2x) to a
maximum of 25 Nm.
Position the top panel in place and secure
11.
with the tension locks on both sides.
EN - 28
xFUME™ ADVANCED 115V – CSA
BAL.0882.0 • V01
Publicité
