Publicité
xFUME™ ADVANCED 115V – CSA
2.4.7
Safety instructions for the electrical power supply
► Ensure that the power supply cable is not damaged, for example, by being driven over,
crushed or torn.
► Check the power supply cable for damage and wear at regular intervals.
► Only operate the device with an undamaged mains connector.
► Protect the mains connector (according to the current) on the mains side. ð 5 Technical data
(Page 15)
► If it is necessary to replace the power supply cable, only models indicated by the manufacturer
may be used.
► Only a qualified electrician should replace the power supply cable and the mains plug.
► Splash-water protection and mechanical stability must be ensured when replacing the mains
plug of the power supply cable.
► To replace or lengthen the power supply cable, use only a cable of the type and with the same
cross-section as the original.
2.4.8
Safety instructions for emergencies
► In an emergency, immediately disconnect all supplies (e.g. electrical power supply, coolant
supply, compressed air supply, shielding gas supply).
► Extinguish burning oil or emulsions using a CO
BAL.0882.0 • V01
or powder fire extinguisher.
2
2 Safety
EN - 11
Publicité
