Publicité
xFUME™ ADVANCED 115V – CSA
Fault
12
Disassembly
Disconnect the compressed air supply.
1.
Remove the current clamp from the cable
2.
assembly.
Remove the extraction hose(s).
3.
Loosen the tension locks on both sides.
4.
Remove the housing and set to the side.
5.
Loosen the castors.
6.
BAL.0882.0 • V01
Cause
Power relay defective
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can
start running unexpectedly and lead to injuries from cuts.
► Switch off the device.
► Disconnect all electrical connections.
Correction
► Check and replace the
power relay as needed, or
contact customer service.
CAUTION
12 Disassembly
EN - 33
Publicité
