Publicité
12.5
Special safety instructions for this machine
Never reach into the running machine.
•
Never open covers or safety devices when the machine is running.
•
•
Do not wear safety gloves when working (rotating parts).
•
Remove chips and workpieces when the machine is at a standstill.
•
Never brake the machine by hand when it is running down.
Never take measurements on rotating workpieces.
•
Always machine unshaped workpieces at low spindle speed to a round shape.
•
Only work on safely clamped workpieces.
•
•
Before clamping the workpiece between two centers, provide it with a centring hole on
both sides.
•
Remove nails and other foreign substances from the workpiece before machining.
12.6
Hazard warnings
Residual risks
Despite intended use, certain risk factors cannot be completely eliminated:
Risk of injury to hands/fingers from freely rotating workpiece during operation and
•
overrun until the machine comes to a complete standstill.
Risk of injury from contact with moving machine parts.
•
•
Risk of injury from sharp edges of the workpiece.
Risk of injury from contact with live components.
•
Risk of injury due to tipping of the machine.
•
Risk of injury to hands or eyes from wood splinters.
•
•
Risk of injury due to incorrect installation of the tool or ejection of tool inserts.
•
Risk of injury due to dust emissions from workpieces treated with harmful agents.
•
Risk of injury to the eye from flying parts, even with protective goggles.
Risk of injury from kickback due to the tool.
•
Hazardous situations
Due to the design and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction of this type indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends on you!
HOLZMANN MASCHINEN GmbH
D AN G E R
WAR N I N G
C AU TI O N
N O TE
www.holzmann-maschinen.at
SAFETY
29
D510F_230V
Publicité
