PROTEOR SYNSYS Notice D'utilisation page 44

Immunity test
Electrostatic discharges
(DES) (IEC61000-4-2)
Radiated radiofrequency
electromagnetic fields.
(IEC61000-4-3)
Proximity fields emitted by
RF wireless communication
devices.
(IEC 61000-4-3)
Electrical fast burst
transients
(IEC61000-4-4)
Shock waves
(IEC61000-4-5)
Conducted disturbances,
induced by RF fields
(IEC610004-6)
Magnetic field at network
frequency
(IEC61000-4-8)
Voltage dips and
interruptions
(IEC61000-4-11)
Test level as per IEC60601-1-2 Ed4
± 8 kV in contact
± 2/4/8/15 kV in air
10 V/m
80 MHz - 2.7 GHz
80 % AM at 1 kHz
Frequency (MHz) Modulation
385 Pulsed modulation: 18 Hz
450 Pulsed modulation: 18 Hz
710 – 745 - 780 Pulsed modulation: 217 Hz
810 – 870 - 930 Pulsed modulation: 18 Hz
1720 – 1845 - 1970 Pulsed modulation: 217 Hz
2450 Pulsed modulation: 217 Hz
5240 – 5500 - 5785 Pulsed modulation: 217 Hz
Power supply: ± 2 kV
Input/output lines: ± 1 kV
Repetition frequency: 100 kHz
Between phases: ± 0.5 kV, ± 1 kV
Between earth and phases:
± 0.5 kV, ± 1 kV, ± 2 kV
3 V 0.15 MHz – 80 MHz
6 V in ISM and amateur radio bands
between 0.15 MHz and 80 MHz
80 % AM at 1 kHz
30 A/m
0 % UT; 0.5 cycles
At 0°, 45°, 90°, 135°, 180°, 225°, 270°
and 315°
0 % UT; 1 cycle at 0°
70 % UT; 25/30 cycles at 0°
0 % UT; 250/300 cycles
EN - 19
Compliance level
± 8 kV in contact
± 2/4/8/15 kV in air
12 V/m
80 MHz – 2.7 GHz
80 % AM at 1 kHz
Required
level
(V/m)
27
28
9
28
28
28
9
Power supply: ± 2 kV
Input/output lines: ± 1 kV
Repetition frequency: 100 kHz
Between phases: ± 0.5 kV, ± 1 kV
Between earth and phases:
± 0.5 kV, ± 1 kV, ± 2 kV
3 V 0.15 MHz – 80 MHz
6 V in ISM and amateur radio bands
between 0.15 MHz and 80 MHz
80 % AM at 1 kHz
30 A/m
0 % UT; 0.5 cycles
At 0°, 45°, 90°, 135°, 180°, 225°, 270°
and 315°
0 % UT; 1 cycle at 0°
70 % UT; 25/30 cycles at 0°
0 % UT; 250/300 cycles
Compliance
level (V/m)
27
28
9
28
28
28
9