Publicité
Replace drive belt
Expanded or cracked drive belts should be replaced as follows:
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
• Disconnect the machine from the power supply.
• Release the locking lever of the motor plate (1).
• Lift the motor by the belt tensioning handle (1a),
the drive belt is slackened.
• Remove the back cover (2) on the headstock.
• D460F: Loosen the switch unit with the bracket
(3) and remove the pin from the hinge (4).
• D460: Remove the side cover plate (5).
• Loosen the 2 opposite worm screws on the
handwheel (6). Do not remove the screws
completely.
• Fix the spindle shaft with the fixing rod (7).
• At the same time, turn the handwheel counter
clockwise from the spindle (8).
• Remove the spacer sleeve of the spindle (9).
39
D460_230V | D460F_230V
Publicité
