Publicité
3. Installation
CONTROL
3.3. Attachment and alignment
Franklin Electric pressure pumps are supplied mounted on a folded sheet metal or metal profile frame. In both
cases, mounting holes are provided and the frame must be anchored to the ground using suitable materials so
that it cannot be displaced from its intended location.
3.4. Electrical connection
Connections may only be carried out by authorised and skilled personnel and in
accordance with the legal obligations and regulations in force.
Before accessing the switchboard, check that the power supply is disconnected. Failure
to do so may result in serious physical and material damage.
Before proceeding with the power supply connection of the booster, check that the
mains voltage corresponds to that of the booster. Always remember to connect the
earth cable correctly and check that it is in perfect condition.
1
Control box/Driver
2
Electropump
3
Non return valve
4
Pressure switch
5
Tank
6, 7, 8
Shut off valves
-EN/8-
EN
Publicité
