Handlebar Switches - Yamaha Raptor 700R Manuel Du Propriétaire

2
1. Light switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
3. Start switch "START"
1. Contacteur d'éclairage "LIGHTS"
2. Coupe-circuit du moteur "ENG. STOP"
3. Contacteur du démarreur "START"
1. Interruptor de luces "LIGHTS"
2. Interruptor de paro del motor "ENG. STOP"
3. Interruptor de arranque "START"
1
3
EBU00530

Handlebar switches

EBU11560
Light switch "LIGHTS"
Set the switch to the "LO" position to turn on the
low beam and the taillight.
Set the switch to the "HI" position to turn on the
high beam and the taillight.
Set the switch to the "OFF" position to turn off all
of the lights.
cC
Do not use the headlights with the engine
turned off for more than thirty minutes. The
battery may discharge to the point that the
starter motor will not operate properly. If this
should happen, remove the battery and
recharge it.
4-9