Publicité
1. Bolt (× 3)
1. Boulon (× 3)
1. Perno (× 3)
1. Oil filler bolt
1. Boulon de l'orifice de remplissage
1. Perno del orificio de llenado
Transfer gear oil replacement
NOTE:
When replacing the transfer gear oil, replace the
engine oil also.
1. Remove the transfer gear case guard.
2. Place the machine on a level place.
3. Place a container under the transfer gear
case.
4. Remove the oil filler bolt and drain bolt to
drain the oil.
5. Install the drain bolt and tighten to specifica-
tion.
Tightening torque:
Drain bolt (transfer gear case):
20 Nm (2.0 m·kgf)
8-23
EBU00462
Publicité
