KitchenAid KERC601 Guide D'utilisation Et D'entretien page 49

PROBLEM POSSIBLE CAUSE
The display is
There has been a power
showing "PF"
failure.
A letter fol-
lowed by the
number shows
on the display
(for example
"E3", "F1")
The display is
The power cord is not
showing "F5" properly grounded.
or "E3"
The key pads
Pads not touched long
do not operate
enough, or not enough time
between each pad pressed.
The Control Lock has been
set.
The Sabbath mode has been
set. ("SAb" appears on the
display.)
The range is not properly
grounded.
If none of these items was causing your problem, see "Requesting Assistance" on page 50
or 51.
T
roubleshooting
WHAT TO DO
Reset the clock. (See page 24.)
Press CANCEL/OFF. If the code
does not disappear, call for service.
(See "Requesting Assistance or
Service" on pages 50-51.)
See Installation Instructions.
Hold down the pad a short time, and
allow a short time between each pad
entry.
Turn off the Control Lock by opening
the oven door, pressing and holding the
Control Lock pad for 5 seconds. (See
"Using the control lock" on page 20.)
Turn off the Sabbath mode by
opening the oven door, waiting up to
15 seconds, and pressing and
holding Number Pad 6 for 5 seconds.
Call an electrician to make sure the
outlet is well grounded. If it is well
grounded, and the key pads still do
not operate, call a service technician.
49