First Steps - BRAND Titrette Mode D'emploi

Is everything in the package?
Confirm that your package includes: Titrette
(length 170 - 330 mm); recirculation tube; 2 micro-batteries 1.5 V (AAA/UM4/LR03); 3 bottle adapters
PP (GL 45/32, GL 45/S 40, GL 32/NS 29/32); 2 colored light shield inspection windows; performance
certificate; and this operating manual.
Initializing
1.
Insert batteries
2.
Switching the
instrument ON
or OFF
bottle-top burette, size 25 ml or 50 ml; telescoping filling tube
®
a) Unscrew the air vent cap by hand or
use a coin (Fig. a).
b) Remove the rear housing (Fig. b).
c) Remove the battery case cover and
insert the batteries. Observe the cor-
rect polarity of the batteries (Fig. c).
d) Close the covers of the battery case
tightly. Carefully press the edges so
that the entire cover rests firmly.
e) First connect the housing at the top,
then snap it closed.
f) Screw in the air vent cap.
Press the On/Off key briefly
to switch the instrument on
or off.
Manually powering off will
delete the displayed value!
a
b
c
1x

First Steps

39