Assembly; First Steps - BRAND Dispensette S Mode D'emploi

4 Assembly

4 Assembly

4.1 First Steps

Follow the safety instructions
> Wear protective clothing, eye protection and protective gloves!
> Always wear protective gloves when touching the instrument or the bottle, especially
> Follow all safety instructions and comply with the limitations of use, see Limitations
> Comply with the operating limitations, see Operating limitations, p. 35.
Selecting the correct discharge valve and discharge tube
The discharge valve and discharge tube are labeled with the spring material. The label 'Pt-Ir' or 'Ta'
must be the same on each instrument. The spring material derives from the application range (ob-
serve Recommended application range, p. 36).
When labels do not match, the desired application is not possible as components can become cor-
roded or decomposed.
1. Checking the retaining ring
a.
38
Operating manual
when using dangerous liquids.
of Use, p. 35.
WARNING
NOTICE
a.
Check that the retaining ring is screwed tight.
9974 91