Factory Default - BRAND Titrette Mode D'emploi

Factory Default

The continuously displayed CAL symbol indicates that the factory default setting has been changed.
If you wish to restore the factory default setting, complete the following instructions.
What to do
1.
Bring up the
CAL mode
2.
Restoring the
factory default
setting
50
How to do it
With the instrument powered
on, press and hold the
CLEAR key for more than
3 seconds. The following
modes will be repeatedly
shown in the display after
one another:
CAL - GLP - APO - dP.
When CAL appears in the
display, release the CLEAR
key. The input symbol blinks
and the adjustment value
for the previously accepted
adjustment appears.
Press the On/Off key and
Pause key at the same time
in order to delete the CAL
symbol.
CAL Mode · Easy Calibration Technique
Keys to press Display readout
> 3 s