Assembly; First Steps - BRAND Titrette 4760141 Mode D'emploi

4 Assembly

4.1 First Steps

1. Inserting batteries
a.
b.
c.
2. Switching the instrument on and off
a.
1 x
9974 69
a.
Unscrew the air vent cap by hand or use a coin.
b.
Remove the rear housing shell.
c.
Remove the battery compartment covers and insert the
batteries. Ensure that the polarity of the batteries corre-
sponds to the symbols on the battery compartment.
d.
Tightly re-seal the battery compartments with the cov-
ers. Carefully press the edges so that each cover fits
snugly on all sides without any gaps between it and the
battery compartment.
e.
Hang the rear housing shell from the top and then snap
it shut.
f.
Screw in the air vent cap.
a.
To switch the instrument on or off, briefly press the ON/
OFF button.
4 Assembly
51
Operating manual