Decimal Place; Dp Mode - BRAND Titrette Mode D'emploi

dP Mode

In dP mode, the display can be selectively set to show 2 or 3 decimal places (factory default setting is 2).
Note: For technical reasons, titration volumes above 20.00 ml can only be displayed to 2 decimal places.
What to do
1.
Bring up the dP
mode
2.
Changing the

decimal place

setting
3.
Confirming
setting
Changing the Decimal Place Settings
How to do it
With the instrument powered
on, press and hold the
CLEAR key for more than
3 seconds. The following
modes will be repeatedly
shown in the display after
one another:
CAL - GLP - APO - dP.
When dP appears in the dis-
play, release the CLEAR key.
The input symbol blinks, and
the factory default setting is
displayed.
Press the Pause key in order
to select a display with
3 decimal places.
(Pressing the key again
resets to a display with
2 decimal places.)
Press the CLEAR key in
order to confirm the desired
decimal place display format.
Keys to press Display readout
> 3 s
1x
1x
53