Kohler Premise K-702479-8L-SHP Instructions D'installation page 8

1. Confirm Shower Base/Bath Ledge and Wall Compatibility
IMPORTANT! For proper door alignment and operation, confirm that the shower base/bath ledge and walls meet the
following requirements. Do not install the door if these requirements are not met.
There must be at least 2-3/16" (56 mm) of flat surface on the shower/bath walls.
There must be at least 1-3/4" (44 mm) of flat surface on the shower base/bath ledge.
Walls must be within 3/8" (10 mm) of plumb.
The shower base/bath ledge must be flat and level between the walls.
1579984-2-A
2-3/16"
(56 mm) Min
1-3/4"
(44 mm) Min
8 Kohler Co.