Kohler Premise K-702479-8L-SHP Instructions D'installation page 12

4. Prepare the Fixed Panel Wall Jamb
Fixed Panel Wall Jamb
IMPORTANT! The fixed panel wall jamb must fit tightly against the threshold and wall.
Position the fixed panel wall jamb on top of the threshold, against the wall.
Slide the alignment tool into the threshold and the fixed panel wall jamb.
Plumb the fixed panel wall jamb.
Tape the fixed panel wall jamb securely in place and mark the fixed panel wall jamb location.
Verify that the threshold is still aligned with the previously marked location.
Using a pencil, mark the anchor hole locations on the fixed panel wall jamb.
Remove the fixed panel wall jamb and set aside.
1579984-2-A
Alignment Tool
12 Kohler Co.