Kohler Premise K-702479-8L-SHP Instructions D'installation page 36

28. Prepare the Soft-Close Assembly
NOTE: For doors 40" or less: The soft-close assembly should be oriented opposite as shown for easier access to closing
speed adjustment.
Using a 3 mm hex wrench, loosen the setscrew on the top hinge clamp.
Verify that the pin of the soft-close assembly is completely inserted into the hinge clamp.
Carefully secure the soft-close assembly with the setscrew.
Before proceeding, verify that the following tools are inside the shower: 2.5 mm, 3 mm, and 5 mm hex wrenches.
1579984-2-A
3 mm
36 Kohler Co.