Publicité
Les langues disponibles
Les langues disponibles
17. Assemble the Cleats to the Header
Slide two additional M5 square nuts into each end of the header. Verify that the flat sides of the square nuts face
outward.
Align the cleats with the square nuts and loosely install the cleats to the header with the M5 x 16 mm screws.
Verify that the assembled cleats are flush on each edge of the header. Tighten the screws.
Kohler Co.
Flat Side of Square Nut
M5 x 16 mm
25
Cleat
1579984-2-A
Publicité
