Publicité
Les langues disponibles
Les langues disponibles
22. Install the Soft-Close Brackets
Soft-Close
Brackets
NOTE: Four screws will come with the soft-close assembly. Only two screws will be used to install the soft-close assembly
brackets to the header.
Using a 2.5 mm hex wrench, loosen the setscrews on the soft-close brackets.
Remove the soft-close brackets.
Align the soft-close brackets with the two innermost M5 square nuts in the header.
Using a 3 mm hex wrench, loosely install the soft-close brackets to the header with the provided M5 x 20 mm screws.
1579984-2-A
2.5 mm
30
M5 x 20 (Qty 2)
3 mm
Kohler Co.
Publicité
